Enter/Exit Programming Mode
The following options apply to the UPC-A symbology.
UPC-A Enable/Disable
When disabled, the reader will not read UPC-A bar codes.
$CABEN01(CR)
UPC-A = Enable
UPC-A Check Character Transmission
Enable this option to transmit the check character along with UPC-A bar
code data.
$CABCT01(CR)
UPC-A Check Character Transmission = Send
84
UPC-A
$CABEN00(CR)
$CABCT00(CR)
UPC-A Check Character Transmission = Don't Send
PowerScan™ PD9530/PBT9500/PM9500
UPC-A = Disable
DEFAULT
DEFAULT