Changing System Speed; Frequency Agility - Datalogic PowerScan PD9530 Product Reference Manual

Enter/Exit Programming Mode

Changing System Speed

1. Link the PM9500 with a BC9xxx Base.
2. With the PM9500, read a "Compatible Mode/Normal Mode Speed" pro-
3. Place the PM9500 into the BC9xxx.
The Reader and Base will now be linked at the new programmed speed.
This feature can also be programmed using Datalogic Aladdin.
1. On the BC9xxx Base, change the Compatible mode parameter to low,
2. Place an unlinked PM9500 onto the BC9xxx base.
The Reader and base will link at the new programmed speed.

Frequency Agility

In exceptionally noisy environments or in case of a high concentration of
radio devices, Star system performance may be improved by configuring
Frequency Agility. Frequency Agility parameters change the way the radio
frequencies are used in a Star communication system.
As when changing the System Speed, use the following procedure:
1. Link the PM9500 with a BC9xxx Base.
2. With the PM9500, read one of the "Frequency Agility" programming
3. Place the PM9500 into the BC9xxx.
Reader and Base will then be linked and the new frequencies handling will be
operational.
DEFAULT
$CSTFA80
Enable frequency hopping
The channel is changed automatically
238
gramming label on page 240
intermediate, or high speed through Aladdin.
labels below.
to set "Low, Medium, or High Speed".
$CSTFA00
Use default fixed channel
PowerScan™ PD9530/PBT9500/PM9500