Enter/Exit Programming Mode
Stand Mode Indication
This operation is useful for indicating when the reader is in Stand Mode. If
enabled, the blue indicator will blink when Stand Mode scanning is active.
$CSMFL01(CR)
Stand Mode Indication = Enable
Pick Mode
Specifies the ability of the reader to decode labels only when they are close
to the center of the aiming pattern. This allows the reader to accurately tar-
get labels when they are placed close together, such as on a pick sheet.
DEFAULT
$CSNPM01(CR)
Pick Mode = Enable
72
DEFAULT
This feature is not compatible with Multiple Labels Reading in a Volume.
$CSMFL00(CR)
Stand Mode Indication = Disable
$CSNPM00(CR)
Pick Mode = Disable
PowerScan™ PD9530/PBT9500/PM9500