Codabar; Codabar Enable/Disable; Codabar Check Character Calculation - Datalogic PowerScan PD9530 Product Reference Manual

Enter/Exit Programming Mode
The following options apply to the Codabar symbology.

Codabar Enable/Disable

When disabled, the reader will not read Codabar bar codes.
DEFAULT
$CCBEN01(CR)
Codabar = Enable

Codabar Check Character Calculation

Enable this option to enables/disables calculation and verification of an
optional Codabar check character. When disabled, any check character in the
label is treated as a data character
DEFAULT
$CCBCC01(CR)
Codabar Check Character Calculation = Enable AIM standard
check char.
138

CODABAR

$CCBEN00(CR)
$CCBCC00(CR)
Codabar Check Character Calculation =
$CCBCC02(CR)
Codabar Check Character Calculation =
Enable Modulo 10 check char.
PowerScan™ PD9530/PBT9500/PM9500
Codabar = Disable
Don't Calculate