Motion Features; Motion Aiming Control - Datalogic PowerScan PD9530 Product Reference Manual

MOTION FEATURES

on page 205
M A C
OTION IMING ONTROL
on page 206
M S
OTION ENSITIVITY
on page 206
M T
OTIONLESS IMEOUT
Use this chapter to configure motion settings for the handheld.
Reference Appendix C, for a listing of standard factory settings.

Motion Aiming Control

Configures the ability of the scanner to Enable/Disable the Aiming system
when motion is detected.
$CMOMD00(CR)
Motion Aiming Control = Disable
$CMOMD01(CR)
DEFAULT
Motion Aiming Control = Enable
Product Reference Guide 205