Navigating The Web Interface; Logging In To The Zoneflex Web Interface - Ruckus Wireless ZoneFlex 2741 User Manual

Navigating the Web Interface

In This Chapter

Logging In to the ZoneFlex Web Interface

Navigating the Web Interface
Logging In to the ZoneFlex Web Interface
If you need to manage your AP, you do it with the features of the ZoneFlex Web
interface (which you already used to set up the AP for use).
If your ZoneFlex network will be managed by a Ruckus Wireless ZoneDirector, you can
manage APs through ZoneDirector rather than individually logging in to each AP's
Web interface.
NOTE: The following procedure assumes that you know the static IP address of the
AP (now in use), or you have some means of determining the dynamic IP address in
use by the AP. The PC you use for AP administration should be on the management
VLAN, if VLANs are used in your network.
To log into the Web interface
1. On the PC, open a Web browser window.
2. In the address or location bar, type the IP address of the AP. Default IP address for
standalone ZoneFlex APs:
192.168.0.1
3. Press <Enter> to connect to the Web interface.
4. If a Windows security alert dialog box appears, click OK/Yes to proceed. The
Ruckus Wireless Admin login page appears.
5. In Username, type super.
6. In Password, type sp-admin.
7. Click Login.
The ZoneFlex Access Point Web interface appears.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3
31