Assembly Instructions; Preassembly Checklist - True XC900 Owner's Manual

ASSEMBLY INSTRUCTIONS

NOTE: Supplemental video available on vimeo.com: https://vimeo.com/724583142?share=copy.

PREASSEMBLY CHECKLIST

BASIC GUIDELINES FOR SETTING UP THE EQUIPMENT
After removing the equipment from the packaging, place the equipment on a clean, level surface. Make sure the electrical
cord easily reaches a grounded three-pronged outlet.
DANGER:
!
*
Do not use an extension cord or ungrounded outlet. The ground helps prevent electrical damage to
your equipment and enhances your safety by helping to prevent shock. Check with a qualifi ed electrician or serviceman if
you are in doubt as to whether the equipment is properly grounded. Do not modify the plug provided with the unit if it will
not fi t the outlet. Have a proper outlet installed by a qualifi ed electrician.*
! WARNING:
Do not use an impact drill when assembling plastic components.
*Power warnings, grounding instructions, and power requirements are only applicable when this product is being used
with the optional power supply.*
CAUTION:
!
• Use caution when assembling this product.
• Unpacking and assembling of this product is a two person task.
• For each step use hardware in the corresponding bag.
Use caution when unpacking this product. Avoid damage to the product and product pads.
DO NOT use a box cutter. DO NOT slice into the packaging.
VERIFY BOX CONTENTS
IMPORTANT! Please verify box contents. If you have questions, or if there are any missing parts, contact product support
(service@truefi tness.com // 800.883.8783).
TOOLS NEEDED FOR
ASSEMBLY
6mm Allen Wrench
8mm Allen Wrench
17mm Wrench
17mm Socket
INCLUDED
IN BOX
YES
YES
NO
NO
TOOLS NEEDED FOR
ASSEMBLY
#2 Phillips Screwdriver
Wire Cutters
Plastic Pry
Tape Measure
INCLUDED
IN BOX
NO
NO
NO
NO
11