Contacting Your Dealer - Christie CP2230 Setup Manual

turns OFF turning the cinema projector off, disconnecting it from a power source, and
opening the lamp door.
The arc lamp operates at a high pressure that increases with temperature. Failure to allow the lamp to
sufficiently cool prior to handling increases the potential for an explosion causing personal injury or property
damage.
1.5

Contacting Your Dealer

If you encounter a problem with your Christie cinema projector, contact your dealer. To assist with the
servicing of your cinema projector, enter the information in the tables and keep this information with your
records.
Table 1.1 Purchase Record
Dealer:
Dealer or Christie Sales/Service Contact Phone Number:
cinema projector Serial Number*:
Purchase Date:
Installation Date:
* The serial number can be found on the license label located on the front panel.
Table 1.2 Ethernet Settings
Default Gateway
cinema projector IP
Address
Subnet Mask
CP2230 Setup Guide
020-100515-04 Rev. 1 (05-2014)
Introduction
1-3