Christie CP2230 Setup Manual page 20

Installation and Setup
combines with a very wide screen, you may have to forfeit some aim and stay more parallel to the screen.
In such cases, some lens offset can reduce the keystone distortion.
3. Position the lamp power supply so that the cables reach the left side of the cinema projector.
4. Install and secure the lamp power supply (LPS) in the rack stand:
a. Remove the right side panel of the rack stand.
b. Remove the cross bar.
2-6
Figure 2-3 Side View of Rack Stand
CP2230 Setup Guide
020-100515-04 Rev. 1 (05-2014)