Removing The Folding Plates - Pressure Seal Group PS 100 Operator's Manual

Folder and sealer
Table of Contents

Advertisement

PS 100

Removing the folding plates

1.
Remove the top cover
2.
Grasp each folding plate as shown in the below diagram and lift to disengage
the notches in the plate from the mounting studs. Pull the folding plate out of
the PS100 at approximately 45°.
Figure 6: Removing the fold plates
14-11-02 Iss. 1.
3. Set-up
Page 15

Advertisement

Table of Contents
loading

Table of Contents