3. Set-up
Setting up the folder
Once you've removed the top cover and folding plates, setting up the PS100's folder
involves three steps:
•
Setting the document stop on each folding plate
•
Setting the adjustable document guide
•
Replacing the folding plates and top cover
Setting the document stop
The location of the document stop along the scales on each folding plate determines
where the folds are made on the documents. The first fold plate controls the first fold,
and the second fold plate controls the second fold.
To set the document stop:
1.
Measure the length of the document to each fold. Determine the settings for the
type of fold you want as shown in the diagram below.
Figure 7: Document fold lengths
Page 16
PS 100
14-11-02 Iss. 1.