Table of Contents
Advertisement
3. Set-up
Setting the adjustable document guide
With the first fold plate removed, set the adjustable document guide on the feed table to
fit the width of the documents you're processing.
To set the adjustable document guide:
1.
Loosen the adjustment knob on the underside of the feed table. Move the
document guide to the right.
2.
Place a document on the feed table, and align the left edge with the fixed
document guide. Hold the document in place.
3.
Using your other hand, align the adjustable guide with the right side of the
document.
4.
Secure the guide in place by tightening the adjustment knob.
When you finish there should be just enough clearance to allow the document to move
freely between the guides. Too much or too little clearance can cause mishandling.
Figure 9: Document stop setting components
Page 18
PS 100
14-11-02 Iss. 1.
Advertisement
Table of Contents
