PS 100
Operator controls
Batch counter
There are two types of batch counter available. The standard counter indicates the
number of documents in the current batch (since it was last reset) and has a push button
reset. There is an additional counter available for the cumulative total, and this may only
be reset by a service engineer.
Illuminated Power Switch
The power switch is illuminated when the PS100 is connected to the mains supply.
Run switch
The run switch lights when:
•
All documents are properly loaded on the feed table, and there are no mishandled
documents anywhere in the PS100
•
The safety cover is fitted
When the run switch lights:
•
Momentarily pressing the run switch processes one document.
•
Pressing and holding the run switch for two seconds processes all of the documents
14-11-02 Iss. 1.
2. Features
Page 9