If The Form Is Jammed In The Sealing Rollers - Pressure Seal Group PS 100 Operator's Manual

5. Operation Errors

If the form is jammed in the sealing rollers:

a) Remove all documents from the in-feed tray.
b) Momentarily press the run switch to eject the mishandled document out of the
rollers.
•
If the document doesn't eject, repeat step b. It may take several attempts.
•
If, after several attempts, the mishandled document doesn't eject, continue with
the next procedure.
It may be necessary to stabilise the forms before folding and sealing them.
This can be achieved by allowing them to rest in the same room as the
PS100 for an hour or more after printing.
When the jammed form is removed from the sealer, check the sealer rollers for any form
particles that may have become stuck with adhesive.
Page 30
PS 100
14-11-02 Iss. 1.