Table of Contents
Advertisement
PS 100
3. Set-up
Removing the top cover
Remove the top cover by placing one hand at the outfeed end and the other close to the
infeed of the PS100. The outfeed end should be lifted first as the top cover is held in
place by a retaining lip above the feed table.
When installing the top cover, make sure that it is firmly seated on top of the unit.
The safety switches for the top cover prevent the PS100 from operating if the cover is not
properly installed.
Figure 5: Removing the top cover
Page 14
14-11-02 Iss. 1.
Advertisement
Table of Contents
