Pressure Seal Group PS 100 Operator's Manual page 41

5. Operation Errors
Condition
Documents are wrinkled
or badly folded.
Two or more documents
are feeding into the folder
together.
Page 34
Possible Cause
Documents not feeding
squarely against document
stop(s).
Dirty folding rollers.
Feed table document
guides are set too tight.
Fold plate document
stop(s) adjusted
improperly.
Folding rollers adjusted
improperly or worn; sealing
rollers adjusted improperly.
Documents in stack are
sticking together.
Worn feed roll.
PS 100
Corrective Action
Adjust the document
stop(s) to squarely deflect
the documents; ensure
the stop setting is identical
on both scales.
Clean folding rollers.
Set guides to allow the
document to move freely
between the guides.
Check and adjust the
position of the fold plate
document stop(s) (p. 14)
Contact your Pressure
Seal distributor for advice.
Fan document stack and
reload documents.
Contact your Pressure
Seal distributor for advice.
14-11-02 Iss. 1.