6. Cleaning the machine
9.
Wipe clean the surface of all the folding and sealing rollers using the moistened
cloth. It will be necessary to rotate each roller, taking care not to let anything
get caught between them. A moderate amount of effort may be required to turn
the sealing rollers. Wipe off any fingerprints from the rollers as they are turned.
10. Replace the top-folding roller.
The flat faces of the bearing holder must be held vertically for the roller to
drop into the holding slots.
11. Close the two snap levers to hold the roller in place.
12. Replace the first and second fold plates.
13. Replace the top cover and then restore the mains power.
Page 36
PS 100
14-11-02 Iss. 1.