Digital Watchdog MEGApix DWC-MPTZ20XFM User Manual page 21

INSTALLATION*
14. After checking the orientation of one touch connector in the
upper housing, press the PTZ mechanism into hook in the
upper housing.
15. To lock the PTZ mechanism to the upper housing, press the
two black handles until the module makes a clicking sound.
16. Close the dome cover. Care must be taken to place the
dome cover on the camera housing by matching the 'Arrow
Mark'.
17. Tighten the four screws on the dome cover in sequence as
shown in the picture.
*NOTE: To achieve optimal sealing, the torque of each screw must be in the range between 0.5 ~ 1.0 N・m
(0.3 ~ 0.73 lbf・ft)
2 1
[14]
[15]
[16]
[17]