Ram Test; Register By Terminal Name; Registration Leds - Siemens optiPoint 410 entry Administrator's Manual

Alphabetical Reference

RAM test

•
•
! page 94

Register by terminal name

•
•
! page 60

Registration LEDs

•
! page 68
210
Use this function to test the ! RAM memory of your optiPoint 410/
420 family S V6.0.
The results are displayed after the test.
! page 139
If set to "On", the phone will send REGISTER messages which contain
the contents of the Terminal Name field ! page 222. If set to "Off", the
phone will send REGISTER messages which contain the contents of
the Terminal Number field ! page 222.
Editing by phone: Switch Editor ! page 157.
! page 115
This option determines whether the line LEDs will be lit to show if they
have been registered successfully when the phone starts up. If set to
be On then as each line is successfully registered its LED will be set
ON.
! page 123