Config Update Authentication; Config Update Dls Ip; Config Update Filename; Config Update File Type - Siemens optiPoint 410 entry Administrator's Manual

Config Update Authentication

Mark if user should have authentication. The following options are always
available.
• On
• Off
! page 87 ! page 135

Config Update DLS IP

If Deployment service is used, enter the ! IP address of the server.
! page 87 ! page 135

Config Update Filename

The name part of the system wide configuration file (also used as a tem-
plate to the name of the terminal specific configuration file). The following
options are always available.
• Change
• Continue
! page 87 ! page 135

Config Update File Type

T he extension type part of the system wide configuration file (also used
as a template to the name of the terminal specific configuration file).The
following options are always available.
• Change
• Continue
! page 87 ! page 135

Config Update FTP IP

The IP address of the FTP server used for the Configuration download. The
address and port are normally obtained at startup from DHCP (as a vendor
specific extension), or failing that from DNS (as a text record associated
with the phone's domain name). The address obtained automatically up-
dates this menu item. If the DHCP or DNS methods do not yield a valid IP
address the menu item value will be used if it holds a non-null IP address.
If the IP address had been obtained by DHCP then it cannot be altered. In
other cases selecting the OK button will invoke the IP Number Editor to
edit the address. The updated address will be used the next time that a
config download is performed. The IP address will be set during startup if
a valid IP address is obtained from DHCP or DNS.
! page 87 ! page 135
Alphabetical Reference
171