Layer 2 Voice; Lan Port Settings; Last Restart; Ldap Server Ip Address - Siemens optiPoint 410 entry Administrator's Manual

Alphabetical Reference

Layer 2 voice

Can be defined only if the ! Layer 2 support is activated (! Quality of Ser-
vice (QoS)).
! page 58

LAN port settings

•
•
•
! page 59

Last Restart

•
! page 96

LDAP Server IP Address

•
•
! page 78

LDAP server Port

•
•
•
•
! page 78
194
! page 117
Use this function to define the bandwidth at which the optiPoint 410/
420 family S V6.0 should be run. The required value depends on the
bandwidth that the switch or router supports in the network.
Bandwith
Automatic
10 Mbit/s full
10 Mbit/s half
100 Mbit/s full
100 Mbit/s half
1 The data can be transmitted and received simultaneously.
2 The data can only be transmitted or received.
The PC port can setup in the same way as the LAN port.
The change will only have effect if you restart the phone.
! page 123
Use this function to view the date and time of the last restart
! page 96 of the optiPoint 410/420 family S V6.0.
If an ! LDAP server is being used, enter the ! IP address of this serv-
er here.
IP editor in optiPoint 410/420 family S V6.0 ! page 159.
! page 136
If an ! LDAP server is being used, enter the ! Port number here for
communication with this server.
Valid values: 1 ... 65535.
Default port is 389
Number editor in optiPoint 410/420 family S V6.0 ! page 157.
! page 136
Use
in standard case (automatic detection)
in 10 Mbit networks in full duplex
in 10 Mbit networks with half duplex
in 100 Mbit networks in full duplex
in 100 Mbit networks with half duplex
1
process
2
process
1
process
2
process