Broadsoft Specific Configuration - Siemens optiPoint 410 entry Administrator's Manual

Configuration files
Each configuration file will be built from a template file containing tags in-
stead of phone-specific parameter values. To create a configuration file,
the Broadworks management system will take the template file as input,
replace the tags with phone-specific values and store using the appropri-
ate device configuration file name. For further information to configure the
download see ! Specify configuration update file, page 87.
Template File
The Broadworks system allows for a number of different template files,
each serving a group of phones. For further information see Broadsoft
Server Administration guide and ! Specify configuration update
file, page 87.

Broadsoft Specific Configuration

Below you will see an example of a possible configuration.
Setting
System
Terminal Number
Terminal Name
Register By Name
SIP Routing
Outbound Proxy
Default OBP Domain
SIP Server
SIP Registrar
SIP Gateway
SIP Transport
SIP Realm
SIP User ID
SIP Password
SIP Session Timer
SIP Session Time
Configuration
Matches the user's Phone Number listed in the Broadsoft
web page.
Blank
Off
Server
Off
Blank
Address of the Broadsoft Server (same as web portal ad-
dress).
Address of the Broadsoft Server (same as web portal ad-
dress).
Blank
UDP
To match the realm of the group.
To match the user's Authentication User Name listed in
the Broadsoft web page.
To match the user's Authentication Password listed in the
Broadsoft web page.
Off
Not applicable
Extended Administration
103