Line Shared Type; Line Password - Siemens optiPoint 410 entry Administrator's Manual

Alphabetical Reference

Line Shared type

Each line on a keyset may be:
•
•
Only one call may be active at a time (connected to the handset or speaker/
mic.) but there may be several other calls connected to keyset that have
been held or are alerting the Keyset. The line keys may be used to select
different lines.
A keyset LED for a shared (or private) line reflects the status of a call on
the line, whether the call is connected to the keyset or to another keyset
with an appearance of the shared line.
Select the desired Type.
•
•
! page 67

Line password

•
•
! page 67
200
Private; only allocated to that Keyset
– Would be normally be used for calls made to the Keyset user.
Shared; accessible by several keysets
– A shared line is an Address of Record which appears on multiple
Keysets. The SIP server is responsible to coordinating basic call
control between the Keyset that have an appearance of the shared
line.
Each line is treated as if the Keyset Operation is Line based, the
server may change call information if the line is Device based.
Shared
Private
! page 128
Enter the according SIP Password.
Value range table:
Permitted values
Length min.
Length max.
! page 128
alphanumeric
6 digits
24 digits