Overview Position On Dsm; Pc Port Settings; Ping - Siemens optiPoint 410 entry Administrator's Manual

Alphabetical Reference
•
•
•
! page 61

Overview position on DSM

Enter the Position of the line in the MultiLine overview on the optiPoint dis-
play module.
Y User Manual

PC Port Settings

•

Ping

•
•
•
•
! page 94
206
OBP
User input
option
p.kelly Enabled
@dom2.com
p.kelly Disabled (Not set)
@dom2.com
p.kelly Disabled (Not set)
p.kelly Enabled
p.kelly Disabled dom2.com p.kelly
@dom1.com
If you use an Outbound Proxy, you have also to configure the domain
name of the Outbound Proxy server ! page 173.
The default setting for the Outbound Proxy flag is Off.
Editing by phone: Switch Editor ! page 157.
! page 115
! page 128
"LAN port settings" ! page 194
Run this ! PING test to check whether a server or another terminal de-
vice (e.g. the optiPoint 410/420 family S V6.0 or servers) can be
reached by ! IP or domain name.
For this, enter or select an ! IP address or domain name as a test tar-
get (the connection to which you wish to test).
Value range table (for user specified IP):
Permitted values
Length max.
Editing by phone: IP Number Editor ! page 159 and — if DNS is appli-
cable ! page 41 — also Text Editor ! page 155
! page 139
OBP
User
domain
(Not set) p.kelly
@dom2.com
p.kelly
@dom2.com
p.kelly
@dom1.com
dom2.com p.kelly
@dom2.com
@dom1.com
numeric (with DNS also alphanumeric)
15 digits (incl. dots)
(with DNS also 92 digits)
Message
routed to
w.x.y.z
a.b.c.d
w.x.y.z
w.x.y.z
w.x.y.z