Survivability - Siemens optiPoint 410 entry Administrator's Manual

Survivability

The survivability feature will allow the SIP User Agent to register with a
backup SIP Proxy which will be used to make and receive calls when the
primary SIP Proxy fails or is not reachable due to a network failure.
The prime reason for this feature is to maintain basic call functionality
when network failures occur and it is therefore expected that some fea-
tures and functionality will not be available when working in a survivability
mode.
Phone path
Parameter
(Menu ! page 148)
Backup Address
-16=Survivability
!
page 219
- 1=Backup address
(change IP address
Backup Port
-16=Survivability
!
page 219
- 2=Backup port
(change port address )
Backup
Registration - 16=Survivability
- 3=Backup registration
!
page 220
(switch on/off)
Backup Reg
Timer - 16=Survivability
- 4=Backup reg timer
!
page 220
(enter time)
Backup OBP
- 16=Survivability
!
page 220
- 5=Backup OBP
(switch on/off)
Backup
Transport - 16=Survivability
- 6=Backup transport
!
page 220
(TCP or UDP; UDP is pre-
pared)
1 or host name (if DNS is applicable
Web Interface path
(Menu ! page 110)
- Survivability
- Backup IP address or DNS
1
) name
(enter IP address
- Survivability
- Port
(enter port address)
- Survivability
- Backup Registration
(mark to enable)
- SIP environment
- Backup Registration timer value
(enter time)
- Survivability
- Backup Outbound proxy
(mark to enable)
- Survivability
- Backup SIP transport
(TCP or UDP;UDP is prepared)
!
page 41)
Extended Administration
1
)
99