Line Primary Line; Line Realm; Line Ring; Line User Id - Siemens optiPoint 410 entry Administrator's Manual

Line Primary line

• Every keyset has a primary line with an Address of Record that typi-
cally represents the user of the keyset (line owner). Only one line on a
keyset can be designated as the primary line by the downloaded con-
figuration, all other lines are secondary or and referred to as non-prima-
ry lines.
A non-Keyset phone only has a single line which is considered to be
the same as the primary line of a Keyset.
• Both primary and non-primary lines can be shared or private. For exam-
ple a shared primary line appears as a secondary line on another keyset
which is then able to monitor the calls to the owner of the primary line.
• Some features can only be applied to the primary line to ensure that
conflicting feature settings between different keysets on the same
shared line cannot occur.
• Mark as primary if correct.
! page 67 ! page 128

Line Realm

• This field displays the realm that the phone is registered in.
• Value range table:
Permitted values
Length max.
! page 67 ! page 128

Line Ring

If the Keyset is not currently in use, and the alerting line is allowed to ring,
the alerting line will get the focus and the optiGuide display will persist un-
til the call is no longer alerting. The audible ringing will be the standard ring
as used on a non-Keyset phone.
Mark ringer on/off.
! page 67 ! page 128

Line user ID

• Enter the according SIP User ID.
• Value range table:
Permitted values
Length max.
! page 67 ! page 128
alphanumeric
92 digits
alphanumeric
92 digits
Alphabetical Reference
201