Intrusion allowed
Allow that an alerting or ringing line is shown in an intrusion bar on DSM
call view. Mark the Checkbox to enable the feature.
Y User Manual
Invalid in-/outbound packets
•
Displays the number of error messages according to ! MIB.
•
The used MIB objects are:
MIB-Objects
iflnErrors
ifOutErrors
! page 92
! page 121
IP routing
•
To have constant access to network subscribers of other domains, you
can enter a total of two more network destinations.
•
An ! IP address of the domain and gateway, and a ! Subnet Mask
must be entered for each further domain you wish to use.
•
Use this function to define the following IP addresses for Route 1/2.
IP address
IP address
Gateway
Mask
•
Value range table:
Permitted values
Length max.
•
Editing by phone: IP Number Editor ! page 159.
! page 57
! page 114
! page 128
Explanation
Non-valid ingoing packets
Non-valid outgoing packets
Use
IP addess of the selected route
IP address of the gateway for this route
Network mask for this route.
numeric
15 digits (incl. dots)
Alphabetical Reference
191