Centralized Conference; Line Key Configuration - Siemens optiPoint 410 entry Administrator's Manual

Sylantro

Centralized Conference

The user enables Centralized Conference in the configuration menu. The
Conferencing option is only displayed if the Conference server URI has
been configured ! page 63.

Line key configuration

NON Bridge Line Appearance phone: – no keys should be set as line keys
– if it was in use as BLA phone before, it is necessary to delete the non-
primary lines before the primary can be deleted.
The username and password should be set up. If the realm is not config-
ured (best practice to do set it up), the phone will use the realm from the
challenge.
PRIMARY line on Bridge Line Appearance – the primary line is set using
the function keys web page to set up a key as a LINE (there is a check box
for primary) This line should have its username and password set up. (com-
ment about realm applies as before - but NOTE
If the realm is set up, the phone will challenge attempts to subscribe to the
lines dialog state)
If the realm is to be left undefined it will need to be configured as NULL
NON-PRIMARY line – the username should be configured.
to use third party registration set password and realm to NULL
to register using credentials of the secondary line use its password (same
comment over realm applies)
Always use SHARED for line types (Private prevents the line being sub-
scribed to for its dialog state)
See also ! page 67.
108
IMPORTANT – ensure server type is set to Sylantro.