Dsm Firmware; Dsm Logo; Dss Address Of Record; Dss Realm - Siemens optiPoint 410 entry Administrator's Manual

Alphabetical Reference

DSM Firmware

Allows the administrator to specify the filename of the optiPoint display
module firmware to be downloaded to the optiPoint display module. This
also allows the Administrator to configure the filename in anticipation of a
optiPoint display module being installed.
! page 77

DSM Logo

An option to download a bitmap image for display on the idle optiPoint dis-
play module screen. The bitmap image may be customer specific, for ex-
ample a logo. A default image is provided with the phone. Enter the filena-
me of the logo to be downloaded to the optiPoint display module.
The logo graphic in the start screen, which is user-defined on installation,
is a Windows bitmap graphic with the following properties:
•
•
•
! page 77

DSS Address of Record

Each DSS (Direct Station Select) will have the SIP Address Of Record
(AoR) of DSS destination and will have an unshifted function key and LED
(DSS key) assigned to it. The assignment of key to DSS is determined by
administration.
•
! page 71

DSS Realm

•
•
! page 71
184
! page 118
max. size (h x w):
colour:
file name
! page 118
Value range table:
Permitted values
Length min.
Length max.
! page 130
This field displays the realm of the DSS destination.
Value range table:
Permitted values
Length max.
! page 130
65 x 190 pixels ca. 15 x 45 mm
4-bit greyscale
e.g. Logo.bmp
numeric
1 digit
20 digits
alphanumeric
92 digits