Ftp Username; Function Key; G.711 Silence Suppression; Group Pickup Uri - Siemens optiPoint 410 entry Administrator's Manual

Alphabetical Reference

FTP username

•
•
•
•
! page 74

Function key

•
•
•
•
! page 73

G.711 Silence Suppression

•
•
•
! page 92

Group pickup URI

•
! page 63
188
Enter the name defined in the ! FTP server as user for accessing the
server.
The password must correspond to the ! FTP password and match the
username on the server.
Value range table:
Permitted values
Length max.
Editing by phone: Text Editor ! page 155.
! page 118
A key on the optiPoint 410/420 family S V6.0 that may be logically as-
sociated with a supported function. A function key can support a sec-
ond function:
– Normal function
– Shifted function
For optiPoint 420 advance and optiPoint self labeling key module there
is an additional field available to enter a name or number for this key.
If required, enter additional parameters in the dialog.
For detailed information see operating manual.
! page 124
It suppresses transmission of packets on no conversation.
Effects the following codecs: G.711, G.723 und G.729.
Editing by phone: Switch Editor ! page 157.
! page 121
To be a member of a Call Pickup group for a notification service or the
user initiated service the phone must be configured by administration
with the URI of the call Pickup group service which is provided by the
server. Enter the URI of the Call Pickup group <groupcallpickup@<SIP
Server IP> (e. g. groupcallpickup@172.16.127 .95 or Domain Name) .
! page 116
alphanumeric
92 digits