Diagnostics Menu - Siemens optiPoint 410 entry Administrator's Manual

Diagnostics menu

The following steps describe the access to the optiPoint 410/
420 economy/economy plus/standard/advance diagnostics menu, starting
from idle state.
1. Select the menu „05=Setup" by pressing the key
Menu:
05=Setup?
Confirm with the key
2. Select the diagnostics menu by pressing the key
Enter admin password
3. Enter the administrator password (default: „123456").
The entry is masked by asterisks „*" .
Enter admin password
******
Confirm with the key
4. Now the first menu item in the dignostics menu is shown:
Diagnostics
01=Display test?>
You can change the sub-menu by pressing the keys
open the menu „01=Display test" by pressing the key
>
:
.
:
.
Basic Administration
>
several times.
k
.
< >
or you can
:
.
49