Siemens optiPoint 410 entry Administrator's Manual page 105

Step Action
All other parameters = NULL, if you do not have any SIP ID,
6
Password, and Realm configured in the BroadSoft system (the
web page will not allow you to submit if you have empty fields).
7 Now you can program the shared line shared1_7024:
Select another key, select Line , deselect the Primary line box,
set Originating selection to 2, enter AoR = shared1_7024 (no
domain name is necessary), and put NULL for all other parame-
ters, if nothing is configured for them in the BroadSoft system.
Shared type has to be set to Shared.
When you finish the line key configuration on x7022, select Up-
8
date. The screens will indicate that the keys are being pro-
grammed, and prompt for phone restart. Go to Administration -
Terminal restart, and select Restart
9 Repeat the steps to configure a primary line 301-566-7023 and
shared line shared2_7024 on the phone x7023.
Now you have the line x7024 configured as primary line on x7024 and as
shared line on x7022 and x7023.
If you dial x7024, e.g. from the phone x7021, all three phones (7022, 7023,
and 7024) will ring, and the LED associated with shared1_7024,
shared2_7024, and the primary x7024 will blink.
Any of the users of these three phones can press the Line key associated
with the blinking LED and take the call. When one user takes the call, the
LEDs associated with the Line on all three phones becomes solid red to
indicate that the line is busy. The user who took the call can place it on
hold, and then reconnect.
Note that the BroadSoft Shared Call Appearance configuration is
completely different from the Sylantro Bridge Line Appearance con-
figuration and from the HiPath 8000 V1 Keyset configuration.
Extended Administration
105