Fuel Tank; Side Shroud; Front Visor - Honda XR125LK Owner's Manual

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM

SIDE SHROUD

REMOVAL/INSTALLATION
Remove the side cover (page 2-2).
Remove the screw [1] and bolts [2].
Remove the side shroud [3] while releasing its hole
from the hook [4] on the fuel tank.
Installation is in the reverse order of removal.

FUEL TANK

REMOVAL/INSTALLATION
Remove the following:
– Side covers (page 2-2)
– Seat (page 2-2)
– Side shrouds (page 2-4)
Turn the fuel valve "OFF".
Disconnect the fuel hose from the fuel valve.
Remove the bolt [1], collar [2] and mount rubber [3].
Remove the fuel tank [4] while releasing it from the
rubber mounts [5].
Installation is in the reverse order of removal.

FRONT VISOR

REMOVAL/INSTALLATION
Remove the following:
– Two bolts [1]/setting nuts [2]
– Headlight aim adjusting screw [3]/washer [4]
– Mount rubber [5]
– Collar [6]
– Nut [7]
– Headlight aim adjuster [8]
Disconnect the headlight connector [9] from the front
visor [10].
Installation is in the reverse order of removal.
After installation, adjust the headlight aim (page 3-15).
2-4
[3]
[4]
[4]
[1]
[2]
[3]
[9]
[1]
[2]
[2]
[8]
[7]
[6]
[1]
[2]
[5]
[10]
[1]
[3]
[4]
[5]