dummyhead
dummyhead
LIGHTS/METER/SWITCHES
BRAKE LIGHT SWITCHES
FRONT (XR125LK/LEK)
Disconnect the front brake light switch connectors [1].
There should be continuity with the brake lever [1]
applied, and there should be no continuity when the
brake lever is released.
FRONT (XR125LK)
Remove the front visor (page 2-4).
Remove the brake light switch wire connectors [1] from
the boot and disconnect them.
There should be continuity with the brake lever applied,
and there should be no continuity when the brake lever
is released.
REAR
Remove the left side cover (page 2-2).
Disconnect the rear brake light switch 2P connector [1].
There should be continuity with the brake pedal applied,
and there should be no continuity when the brake pedal
is released.
18-8
[1]
[1]
[1]
[1]