Honda XR125LK Owner's Manual page 82

dummyhead dummyhead
Connect the carburetor heater connector [1] and ground
Except CO, III LA
wire connector [2].
types:
Secure the carburetor heater wire with the wire clamp
[3].
Install the carburetor heater cover [1] and tighten the
Except CO, III LA
screw [2] securely.
types:
Connect the fuel hose [1] to the fuel valve.
After installing the carburetor, check the following:
– Throttle grip free play (page 3-3)
– Engine idle speed (page 3-8)
– Pilot screw adjustment (page 6-12)
THROTTLE VALVE
Install the spring [1] into the jet needle retainer [2].
Install the jet needle [3] and retainer to the throttle valve
[4].
Turn the jet needle retainer clockwise and lock it.
FUEL SYSTEM
[3]
[1]
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[4]
6-9