Honda XR125LK Owner's Manual page 136

dummyhead dummyhead
Remove the flywheel [1] using the special tool.
TOOL:
[2] Flywheel puller
Remove the woodruff key [1] and needle bearing [2].
Be careful not to
damage the
crankshaft.
INSTALLATION
Apply engine oil to the needle bearing and install it onto
the crankshaft.
Install the woodruff key into the crankshaft key groove.
Clean any oil from the tapered portions of the
crankshaft and flywheel.
Install the flywheel [1] by aligning the key way with the
key on the crankshaft.
Apply engine oil to the flywheel nut threads and seating
surface.
Install the washer [2] and flywheel nut [3].
Hold the flywheel with the special tool and tighten the
flywheel nut [1].
TOOL:
[2] Flywheel holder
TORQUE: 74 N·m (7.5 kgf·m, 55 lbf·ft)
07933-KM10000
07725-0040001
ALTERNATOR/STARTER CLUTCH
[2]
[2]
Align
[3]
[2]
[1]
[1]
[1]
[1]
[2]
11-5