Room Monitor; Switch Room Monitor On; Set The Receiver Unit - Motorola IT.6.1T Owner's Manual

44

11. Room Monitor

You can use your IT.6T handset to monitor the sounds in another room. If the
sounds reach a certain level the handset will automatically dial out to a pre-
set external number or to another handset. When the Room Monitor is set
to On, the handset will display Room Monitor On and only the microphone
will be active to monitor the sound levels in the room. Both the speaker and
receiver will be set to Off and the handset will not ring if there is an incoming
call.
11.1

Switch Room Monitor On

1. Press Menu, scroll to Room
2. On is highlighted, press OK.
The handset returns to idle screen and the display shows Room Monitor
3.
switch off Room Monitor press Off.
4. Press to return to standby.
NOTE
If no receiver unit has been set (either an external number or additional
handset number) then the unit will beep and the display shows
receiving unit.
11.2

Set the receiver unit

1. Press Menu, scroll to Room
2. Scroll to Call To and press OK.
3. Scroll to Internal or External
Internal
1. Press OK and the registered handset will be listed, for example "Handset
2" .
2. Scroll or to select the handset the Room Monitor will call if the noise
levels reach a certain level.
3. Press OK.
NOTE
If only one handset is registered the display prompts
to the previous screen. You must register additional handsets before the
handsets will be displayed and make Internal calls.
External
Either
1. Press OK, Enter Number is highlighted.
2. Press OK, enter the external number and press OK.
Room monitor
Monitor and press OK.
Monitor and press OK.
and press OK.
Please set
No additional HS and returns
On. T o