Using The Phone; Switch The Handset On / Off; Calls; Make A Call - Motorola IT.6.1T Owner's Manual

22

4. Using the phone

NOTE
Your handset will automatically time the duration of all external calls, the
call timer will display on the screen. When the call ends, the total duration of
your talk time is shown for 3 seconds.
4.1

Switch the handset on / off

Press and hold
4.2

Calls

Once you have paired your IT.6T with your mobile, you can make calls over
the home line or mobile network using the IT.6T handset, to pair the IT.6T
with your mobile, see page 19.
4.2.1

Make a call

1. Press . Home is highlighted.
2. Scroll to the line you want to use and press OK.
3. When you hear the dial tone, dial the number.
NOTE
If you choose Mobile 1 or Mobile 2 and no mobile is paired the handset will
return to standby.
4.2.2

Preparatory dialling

1. Dial the number first. If you make a mistake press Clear to delete the last
digit.
2. Scroll to , or .
3. Press to dial.
NOTE
To enter a pause (P) when pre-dialling, see page 28.
4.2.3

Make a call using quickdial keys

1. Press and hold the relevant keypad number to dial the pre-stored number
directly.
NOTE
To assign a quickdial number, see page 31
4.2.4

End a call

Press , or place the handset back on the base or charger.
4.2.5

Receive a call from the home line

When you receive an external call, the phone rings and an avatar shows on
the display.
Using the phone
to switch the handset on or off.