Motorola IT6 Quick Start Manual

Digital Cordless Telephone with
Answering Machine
IT6 Quick Start Guide
For IT6 and IT6-2
This Quick Start Guide provides all the information
you need to get you started. If you need more detailed
instructions, please refer to the full user guide available
in the IT6 box.
Alternatively, contact Customer Service at:
.
1-888-331-3383
• When the handset is fully
Step 3. Charge the handset
charged, plug the telephone
• Place the handset on the base
line cord into the socket marked
and charge for at least 24
on the underside of the base
hours. When the handset is
and plug the other end into the
fully charged, the icon is
telephone wall socket.
displayed.
Step 4. Setting the date and
time:
If you have subscribed to a Caller ID
Service and Auto Clock is set to on the
date and time is set automatically
for all handsets when you receive
your first call.
If you do not have a Caller ID
service, you can set the date and
time manually.
M d
• Press and scroll to Clock/Alarm.
Press . Display shows Date & M
Time, then press .
• Enter the date using the format
MM/DD e.g. 08/04 for August 4th.
• Enter the time using the 12 hour
format HH:MM, e.g. 02:45.
u d M
• Press or to change from A
e
(am) to P (pm) and press .
IMPORTANT
You cannot access the battery in
the handset. Do not attempt to • Press to return to standby.
remove the battery, as you may
damage the phone. If you need
to replace the battery, contact
customer service.
Box Contents
IT6 handset IT6 base
Telephone line cord
Power adapter for phone
base to electrical outlet
Digital Cordless Telephone
with Answering Machine
Motorola IT6
For IT6 and IT6-2
Warning: Charge the handset for 24 hours before use.
Guides
Handset
Display Scroll right / Clear / Mute
Earpiece
/ Back
Call Log / Scroll Up /
Scroll to the right.
Volume up
u Delete characters on screen
Open the Call log. Press
when entering names and
to enter Call Log menu and
numbers.
d
then press to select Call
Mute / unmute the
List or Answ machine menu.
microphone during a call.
Scroll up through lists and
Go back to previous menu
settings.
level is displayed on
the screen.
Menu / OK
Enter the main menu.
End call / Switch handset
Select the option displayed
on/off
on screen.
End a call.
Confirm menu option – OK
When in a menu, go back to
is displayed on screen.
standby mode.
Press and hold to switch
Redial
handset off (when in
Open the redial list.
standby) or on.
Talk / Hands-free key
Intercom
Make or answer a call.
Press to make an internal call.
Activate and deactivate
hands-free during a call.
Phonebook / Scroll Down /
Volume down
IMPORTANT
Open the phonebook.
Hands-free activation can
Scroll down through lists and
suddenly increase the
menus.
volume in the earpiece to a
Decrease the earpiece volume.
very high level. Make sure
Ringer off / Flash / # /
the handset is not too close
Change case
to your ear.
Press and hold to switch
Pulse to Tone Dialling / * /
handset ringer on or off.
Keypad lock
Use flash (F) functions.
During a call, press and hold
Dial a #.
to switch from pulse dialling
When entering letters
to tone dialling.
/ editing, short press to
Dial a *.
change the case from Abc to
In standby mode press and
abc or ABC mode.
hold to lock/unlock the
Microphone
Pulse / Space
keypad.
When dialling or storing a
number, press and hold to
enter a pause (P).
Box Contents
If you have purchased a IT6-2 BATTERY PERFORMANCE
you will also have the following
In ideal conditions, a fully charged
additional items:
battery should give up to 7 hours
talk time or up to 130 hours standby
• Additional handset and charger.
1
time on a single charge.
• Power adapter for charger.
Note that the new battery does not
• Telephone line cord reach the full capacity until it has
been put to normal use for several
IMPORTANT
days.
Only use the telephone line cord
To keep the battery in the best
supplied. This equipment is not
condition, leave the handset off the
designed for making emergency
base for a few hours at a time.
telephone calls when the power
1
All talk and standby times are
fails. Alternative arrangements
approximate and depend on
should be made for access to
features selected and usage
emergency services.
pattern
.
Warning! You cannot access the
battery in the handset.
INTELLIGENT CHARGING
Your IT6 supports Intelligent
BATTERY LOW WARNING
Charging, this means when the
If you hear a warning beep every 2
handset is fully charged, the base
minutes during a call, you will need
will automatically detect this
to recharge the handset before you
and stop drawing power from
can use it again.
the electrical outlet to charge
When charging, icon will scroll
the handset, saving unnecessary
on the display.
power usage.

Display icons

ON when the line is in use.
Flashes when there is an incoming call.
Flashes when you have missed calls and a new number(s) are in the
Calls list.
Handset ringer is OFF.
Steady when the handset is registered and within range of the base. Disappears
when the handset is out of range and flashes when searching for the base.
Flashes when you have new voicemail messages.
Off when you have no voicemail messages.
Phonebook is open.
The alarm clock has been set.
Hands-free mode is activated.
Answering machine is ON.
The approximate power levels of your battery are indicated as
below:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Battery is almost empty. The battery icon will flash and emit a warning
beep every 2 minutes during call.

Getting started

Step 1. Set up the base IMPORTANT
Only use the power and telephone
• Plug the power adapter into
cables supplied with the product.
the socket marked on the
underside of the base and plug
Step 2. Connect the charger
the other end into the electrical
(Multi-pack only)
outlet.
• Plug the power adapter into
the socket marked on the
NOTE
underside of the charger and
Position the base at least 6
plug the other end into the
feet away from other electrical
electrical outlet.
appliances to avoid interference.
Putting it as high as possible
ensures the best signal.
A

Menu navigation

Navigating the menus
The basic steps of navigating through the menu and on-screen options.
M
• From the standby screen, press .
The main menu is opened.
u d
• Use the ( ) or ( ) keys to scroll through the menu.
• Soft key options OK and M are displayed.
b
Press to select OK and open a sub-menu or validate an option.
e
Press to go back to previous menu level, correct a character or
cancel an action.
• Press to return to standby.
NOTE
If you do not press any button on the handset for 30 seconds the display
will automatically return to standby. It will also return to standby when the
handset is placed on the base or charger.