Motorola CD5 Series Digital Cordless Telephone with Answering Machine For: CD5011, CD5012, CD5013 and CD5014 Handset: Motorola CD501-HS Base: Motorola CD501-B Charger: Motorola CD501-C Quick Start Guide For a full explanation of all features and instructions, please refer to the User Guide.
If you have purchased an CD5 multiple pack you will also have the following additional items: • Handset (Motorola CD501-HS) • Charger cradle (Motorola CD501-C) • AC power adaptor for the charger cradle • 2 x rechargeable 750mAh Ni-MH battery cells...
Getting started Connecting the base LINE Plug the telephone line cord into the socket marked on the rear of the base. Plug the other end of the telephone line cord into the telephone wall jack. 2. Plug the AC power jack into the socket marked on the rear of the base and the AC power adaptor into the AC power outlet.
3. If you are charging the batteries for the first time, place the handset on the base to charge for at least 16 hours continuously. 4. When the handset is fully charged, icon will appear steady on the display. Connecting the handset and charger cradle (for multi-pack only) If you have purchased a multiple pack, you will need to carry out this process for all the handsets and charger cradles.
Overview of the handset A Handset LED Flashes when there is an incoming call. B Amplified volume During a call, press to amplify the ear piece volume. C Earpiece volume up During a call, press to increase the earpiece volume. D Earpiece volume down During a call, press to decrease the earpiece volume.
Scroll Up / Ringer volume up In menu, scroll up through lists and settings. In standby, press to increase the ringer volume. Menu / OK In standby, enter the main menu. In standby, if there is a notification on the screen, press and hold to enter the menu without clearing the notifications.
Overview of the base A Memory label B Volume up / down Increase and decrease playback volume. C Find key The find key is a useful way to find lost handsets. Press Find on the base. All handsets ring. Find Press again to cancel the find call or press any key on the handset to stop the find call.
Using the phone Mute Mute the microphone so that you Calls can talk to someone else in the room without your caller hearing you. 5.1.1 Using the handset During a call, press Mute. The Make a call microphone is muted and Call muted is displayed.
Handset equalizer Transfer an external call to another handset This feature clarifies the voice of the You can transfer an external call to person you are talking to, producing another handset registered to the a more natural-sounding voice that is base.
Call Waiting with Dial mode Caller ID The default CD5 dialing mode is suitable for your country and network To use Call Waiting with Caller ID, you operator. It is unlikely that you should must first subscribe with your phone need to change this setting unless service provider.
Check with your telephone service provider for network issues. • Reset the Motorola CD5 by removing the batteries from the handset and unplugging the AC power from the base. Wait for around 15 seconds before connecting it again. Allow up to one minute for the handset and base to synchronize.
Check that you are not too far from the base. • Reset the Motorola CD5 device by removing the batteries from the handset and unplugging the AC power from the base. Wait for around 15 seconds before connecting it again. Allow up to one minute for the handset and base to synchronize.