Incoming Message Sound Quality; Call Screening; Remote Access - Motorola IT.6.1T Owner's Manual

NOTE
If Time Saver is set, the answering machine will answer after 3 rings during
remote access if you have new messages. If you do not have any new
messages, it will answer after 5 rings. This means you can hang up after 4
rings knowing you have no new messages, saving you time and the cost of
the call.
7.11

Incoming message sound quality

You can adjust the sound quality of incoming messages, there are two
different qualities Normal and High.
1. Press Menu, scroll to Answer
2. Scroll to Rec'd Quality and press OK.
3. Scroll to Normal or High and press OK.
4. Press to return to standby.
NOTE
The sound quality can only be adjusted before recording starts.
If the sound quality is set to
40 minutes.
7.12

Call screening

When the answering machine is on and takes a call, you can use the
loudspeaker to listen to the caller leaving a message. Y ou can then identify
the caller and decide whether to take the call in person.
1. When the handset rings, wait for the answering machine to take the call.
When the caller begins leaving a message, the display shows Recording.
Press Screen to hear the caller.
2. To interrupt and speak to the caller directly, press
3. Press to return to standby.
7.13

Remote access

Remote access allows you to operate your answering machine and listen to
your messages by calling the IT.6T from another phone.
The default setting is Off.
1. Call your IT.6T. When you hear the announcement, press #.
2. Enter your 4 digit remote access PIN (default setting = 0000).
NOTE
You should change this code for additional security, see page 40.
3. Use the following keys to operate your answering machine:
Machine and press OK.
High the message recording time will reduce to
Using the answering machine
.
39