Room Monitor; To Switch Room Monitor On; To Change The Monitor Level; To Set The Dial Out Number - Motorola CD111 Owner's Manual

11. Room Monitor

You can use your CD1 handset to monitor the sounds in
another room. If the sounds reach a certain level the handset
will automatically dial out to a preset external number or to
another handset. When the Room Monitor is set to
Room Monitor On
handset will display
will be active to monitor the sound levels in the room. Both
the speaker and receiver will be set to
will not ring if there's any incoming call.
11.1

To switch Room Monitor On

D
Menu
1. Press , scroll to
Monitor
is highlighted. Press
highlighted.
D
Select
2. Press , scroll
displayed for 2 seconds. The handset returns to idle
screen and display as
Room Monitor
To switch off
11.2

To change the monitor level

The monitor level can be set to High or Low, the default
setting is "Low".
To increase the sensitivity of the Room Monitor:
Room Monitor
On
and only the microphone
Off
and the handset
Extra Select Room
then press .
Select Mode
. will be
On Select Set to ON
to then press .
Room Monitor On
.
Off
press .
Menu
1. Press , scroll
D
or to select
11.3

To set the dial out number

Menu
1. Press , scroll
, the
U
2. Use the
External
Select
1. Press
2. Enter the number and press
displayed.
Room Monitor
When
reaches a certain level the number will be automatically
dialled.
is
Internal
Select
1. Press
example "Handset 2".
U
2. Scroll or
call if the noise levels reach a certain level.
Select
3. Press
NOTE
If only one handset is registered the display prompts "Not
available" and returns to the previous screen. You must
D
Level Select
to , press
Low High
or setting.
D
Call to
to and press
D
External
or key to select
Enter Number:
and prompt will be displayed.
Save Saved
.
is switched on and the sound level
and the registered handset will be listed, for
D
to select the handset the
Set to handset 2
and is displayed.
U
and scroll
Select
.
Internal
or .
will be
Room Monitor
will
39