Switch Remote Access On / Off; Change The Remote Access Pin - Motorola IT.6.1T Owner's Manual

40
Key Operation
1 To repeat the current message or
skip back during message playback
2 To play messages
3 To skip forward during messages
6 To delete during messages
7 To switch Answering machine
on (not available in message
playback)
8 To stop message playback
9 To switch Answering machine
off (not available in message
playback)
NOTES
If you have any new messages they will be played after you have entered
your remote access PIN code.
If you enter an incorrect PIN code you will hear "Incorrect security code or
three beeps (error beeps). You can try entering the code again. If it is still
incorrect the IT.6T will hang up.
7.14

Switch remote access on / off

1. Press Menu, scroll to Answer
2. Scroll to Remote
3. Scroll to Off or On then press OK.
4. Press to return to standby.
7.15

Change the remote access PIN

The default remote access PIN is 0000.
1. Press Menu, scroll to Answer
2. Scroll to Remote
PIN and press OK.
3. Scroll to Set
4. Enter the old PIN and press OK. (default setting = 0000)
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press OK.
7. Press to return to standby.
Using the answering machine
Machine and press OK.
Access and press OK.
Machine and press OK.
Access and press OK.