Room Monitor; Switch Room Monitor On; Set The Receiver Unit - Motorola IT.6T User Manual

11. Room Monitor

You can use your IT.6T handset to monitor the sounds in another room. If the sounds reach
a certain level the handset will automatically dial out to a pre-set external number or to
another handset. When the Room Monitor is set to On, the handset will display Room
Monitor On and only the microphone will be active to monitor the sound levels in the
room. Both the speaker and receiver will be set to Off and the handset will not ring if there
is an incoming call.
11.1

Switch Room Monitor On

1. Press Menu, scroll to
2. On is highlighted, press OK.
e
3. The handset returns to idle screen and the display shows
off Room Monitor press Off.
4. Press to return to standby.
NOTE
If no receiver unit has been set (either an external number or additional handset number)
then the unit will beep and the display shows
11.2

Set the receiver unit

1. Press Menu, scroll to
2. Scroll to Call To and press OK.
3. Scroll to Internal
Internal
1. Press OK and the registered handset will be listed, for example "Handset 2".
2. Scroll or to select the handset the Room Monitor will call if the noise levels reach a
certain level.
3. Press OK.
NOTE
If only one handset is registered the display prompts
the previous screen. You must register additional handsets before the handsets will be
displayed and make Internal calls.
External
Either
1. Press OK, Enter Number
2. Press OK, enter the external number and press OK.
Or
1. Press OK, scroll to
Room monitor
Room Monitor and press OK.
Room Monitor and press OK.
or External and press OK.
is highlighted.
Select Number and press OK.
Room Monitor
Please set receiving unit.
No additional HS
On. To switch
and returns to
45