Handset Name; First Ring; Auto Pick Up; Auto Hang Up - Motorola D1001 User Manual

m
4. Press to confirm.
>
5. Press to return to standby.

First ring

Your D1000 will automatically detect the Caller identification (Subscription dependent). If you do
not wish to hear the ring before the caller identification is displayed you can manually set FIRST
RING to OFF. The default setting is ON.
m d
1. Press , scroll to PERSONAL SET and press
m
2. HANDSET TONE is displayed. Press and scroll
u d
3. Scroll or to select ON or OFF.
m
4. Press to confirm.
>
5. Press to return to standby.

Handset name

Personalise your handset, with a name or location for example Peter or Bedroom. Maximum 10
characters.
m d
1. Press , scroll to PERSONAL SET and press
d m
2. Scroll to HANDSET NAME and press
e
3. Press to delete the current name.
4. Enter the name you want – maximum 10 characters and press
to save.
>
5. Press to return to standby.

Auto pick up

With Auto pick up switched on, you can answer a call just by lifting the handset off the base or
charger. If switched off, you will have to press
m d
1. Press , scroll to PERSONAL SET and press
d m
2. Scroll to AUTO PICK UP. Press .
u d
3. Scroll or to select ON or OFF.
m
4. Press to confirm.
>
5. Press to return to standby.

Auto hang up

With Auto hang up switched on, you can end a call just by replacing the handset on the base or
charger. If switched off, you have to press
m d
1. Press , scroll to PERSONAL SET and press
d m
2. Scroll to AUTO HANG UP. Press .
u d
3. Scroll or to select ON or OFF.
m
4. Press to confirm.
>
5. Press to return to standby.
16
m
.
d m
to FIRST RING. Press .
m
.
. The current name is displayed.
m
<
to answer a call. The default setting is On.
m
.
>
to hang up. The default setting is On.
m
.

Room Monitor on/off

Leave one handset in a room and use another handset to hear sounds in that room.
m d
1. Press , scroll to PERSONAL SET and press
d m
2. Scroll to ROOM MONITOR. Press .
u d
3. Press or to select ON or OFF.
m
4. Press to confirm.
When switched On, you can leave this handset in the room you wish to monitor. Only the
microphone is on. Anyone in the room cannot hear you.

Room Monitor

1. Switch a handset's room monitor mode setting On and place that handset in the room.
I
2. At a second handset, press and enter the number of the handset you are using as a
room monitor. You can now hear sounds coming from the room.
TIP
To stop room monitoring at any time, press
WARNING
This product is not intended for use as a baby safety device and is not a substitute for adult
supervision.

Backlight on/off

m d
1. Press , scroll to PERSONAL SET and press
d m
2. Scroll to BACKLIGHT. Press .
u d
3. Press or to select ON or OFF.
m
4. Press to confirm.

Keypad lock

Prevent accidental dialling while carrying the handset by locking the keypad.
*
1. Press and hold .
- The display shows KEYS LOCKED.
*
2. To unlock the handset, press and hold
NOTE
While the keypad is locked, you can answer incoming calls as normal.
m
.
>
.
m
.
again.
Personal settings