Connecting The Base; Charging The Handset - Motorola IT.6.1T Owner's Manual

Connecting the base

1. Plug the telephone line cord into the socket marked
of the base.
2. Plug the power adaptor into the socket marked
the base and plug the other end into the mains power wall socket. Switch
on the mains power.

Charging the handset

1. If you are charging the battery for the first time, place the handset on the
base to charge for at least 24 hours continuously.
2. When the handset is fully charged,
display. Plug the other end of the telephone line cord (make sure that one
end is already plugged into the base) into the telephone wall socket.
NOTE
You cannot access the battery in the handset. Do not attempt to remove the
battery, as you may damage the phone. If you need to replace the battery,
contact customer service helpline found in this user guide.
on the underside
on the underside of
icon will appear steady on the
9
Getting started