Connecting The Handset And Charger - Motorola IT.6.1T Owner's Manual

10

Connecting the handset and charger

(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process
for all the handsets and chargers.
1. Plug the power adaptor into the socket marked
the charger and plug the other end into the mains power wall socket.
2. If you are charging the battery for the first time, place the handset on the
charger to charge for at least 24 hours continuously.
3. When the handset is fully charged,
display. T he display will show the date and time to indicate that it is
registered to the base.
BATTERY LOW WARNING
icon flashes on the display and you hear a warning beep every 30
If
seconds during a call, you will need to recharge the handset before you can
use it again.
When charging,
INTELLIGENT CHARGING
Your IT.6T supports Intelligent Charging, this means when the handset is
fully charged, the base will automatically detect this and stop drawing power
from the mains to charge the handset, saving unnecessary power usage.
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery should give up to 7 hours talk
time or up to 100 hours standby time on a single charge.
Getting started
icon will scroll on the display.
on the underside of
icon will appear steady on the
1