Cassette Pickup Solenoid; Removing The Cassette Pickup Solenoid; Paper Feed Roller; Removing The Cassete Feed Roller - Canon MF6500 Series Service Manual

[2]
2) Release the claw [1], and then detach the sensor cover [2].
[2]
3) Disconnect the connector [1], release the claw, and then remove the
cassette paper sensor [2].

7.6.4 Cassette Pickup Solenoid

7.6.4.1 Removing the Cassette Pickup Solenoid

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover and rear-left cover.
2) Remove the relay PCB, registration clutch, and pickup drive unit.
3) Remove the gear [1] and screw [2], and then remove the pickup solenoid
[3].
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[1]
[1]
F-7-10
[1]
F-7-11
[2] [1]
F-7-12
[1]

7.6.5 Paper Feed Roller

7.6.5.1 Removing the Cassete Feed Roller

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the cassette.
2) Place the machine with the rear panel down. However, since the exhaust
duct projects about 16 mm from other area of the rear panel, insert stacks
of paper or the like under the rear panel so that the machine stands stably.
3) While pressing the separation roller [1] to release the pressure, remove the
boss [2] and slide the feed roller upward until the shafts [3] are separated.
4) Pull out the feed roller [4] to remove it.
5) Remove the bushing [1] and shaft [2], and then remove the feed roller [3].

7.6.6 Manual Pickup Roller

7.6.6.1 Removing the Manual Pickup Roller

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
0011-5381
1) Detach the front cover and front-left cover.
2) Remove the screw [1], and then detach the roller cover [2].
[2]
[3]
F-7-13
[2]
[1] [3]
F-7-14
[2] [1] [3]
F-7-15
Chapter 7
0011-5298
[4]
0011-5322
7-7