024:Cis Scan Position During Adf Scanning; 026:Distance From The Standby Position Of Cis To The Shading Start Point; 031Vertical Scan Start Position Adjustment; 032Horizontal Scan Start Position Adjustment - Canon MF6500 Series Service Manual

Chapter 14
No.
045:
046:
047:
048:
049: - 053:
054:
055: - 192:
193:
194:
195:
196: - 350:
If any operation error occurs after changing the setting value, change the setting value to the original one.
14.4.2 <024:CIS scan position during ADF scanning>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
This value is used when automatic scan position adjustment (TESTMODE>"2"SCAN TEST>"3"SHEET POS ADJ) fails.
14.4.3 <026:Distance from the standby position of CIS to the shading start point>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
White shading can be adjusted finely.
Normally, do not change the setting value. If any operation error occurs after changing the setting value, change the setting value to the original one.
14.4.4 <031Vertical scan start position adjustment>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Adjust the position at which vertical scanning of a book starts. The larger the adjustment value, the narrower the left-side margin of the image becomes.
14.4.5 <032Horizontal scan start position adjustment>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Adjust the position at which horizontal scanning of a book starts. The larger the adjustment value, the narrower the top margin in the image becomes.
14.4.6 <033Vertical scan magnification correction>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Correct the magnification of vertical scanning of a book. The larger the adjustment value, the more the image stretches in the vertical scanning direction.
14.4.7 <034Horizontal scan magnification correction>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Correct the magnification of horizontal scanning of a book. The larger the adjustment value, the more the image stretches in the horizontal scanning direction.
14.4.8 <035: - 036:Reader motor speed change>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Though no market adjustment work needs to be carried out, enter factory defaults at image processor PCB replacement.
14.4.9 <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)>
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Adjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of the
image becomes.
14-8
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Function
Horizontal scan end position correction
(fine:scanning on ADF)
Horizontal scan end position correction
(standard:scanning on ADF)
Vertical scan magnification correction (scanning
on ADF)
Horizontal scan magnification correction
(scanning on ADF)
Not used
Pickup motor speed correction (when the ADF is
used)
Not used
ADF special paper, standardized size: LGL
misidentification-ready
ADF special paper, standardized size: LTR
misidentification-ready
ADF special paper, standardized size: LTR_R
misidentification-ready
Not used
Default Setting range
75 0-200
75 0-200
32 0-32
32 0-32
32 0-32
0 0 : LEGAL
1 : FOOLSCAP
2 : M_OFFICIO
3 : A_FOOLSCAP
4 : FOLIO
5 : G_LEGAL
6 : A_OFFICIO
7 : B_OFFICIO
0 0 : LTR
1 : G_LTR
2 : A_LTR
0 0 : LTR_R
1 : FOOLSCAP
2 : OFFICIO
3 : E_OFFICIO
4 : G_LTR_R
5 : A_LTR_R
Unit
one unit=0.1mm
one unit=0.1mm
one unit=0.1%
one unit=0.1%
one unit=0.1%
0011-4166
0011-4167
0011-4168
0011-4169
0011-4170
0011-7354
0011-4176
0011-4177