Parts Replacement Procedure; Fixing Unit; Removing The Fixing Unit - Canon MF6500 Series Service Manual

Chapter 8

8.4 Parts Replacement Procedure

8.4.1 Fixing Unit

8.4.1.1 Removing the Fixing Unit

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover and front cover, and then detach the rear-left cover.
2) Remove the boss [1], and then slide the guide (front) [2] to remove it.
[2]
3) Disconnect the two connectors [1], and then release the cable from the
clamp.
4) Remove the screw [2], and the remove the clamping plate [3].
8-4
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[1]
F-8-4
[1]
F-8-5
0011-5386
5) Remove the three connectors [1] and one screw [2], and then slide the fan
duct [3] upward to remove it.
6) Remove the boss [1], and then slide the guide (rear) [2] backward to
remove it.
7) Release the hook, remove the fixing gear retainer [1], and then remove the
fixing gear [2].
[3]
[2]
F-8-6
[1]
[3]
[2]
F-8-7
[2]
[1]
F-8-8